Chandelier Lights

Material

Brass, with cut glass shades and crystal drops

Finish

Antique brass

Diameter

29 in / 73.7 cm

Height

35 in / 88.9 cm, without chain

Arms

Six, each with a hanging cut glass shade

Light source

Six E14 bulbs (not included)

Minimum ceiling height

9 ft over a table; 10 ft where people walk beneath

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush to reach into the leaves. Clean the glass shades and crystal drops with a barely damp cloth, then dry them at once. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast brass, with a blue painted metal body

Finish

Antique brass and cobalt blue

Diameter

43 in / 109.2 cm

Height

34 in / 86.4 cm, without chain

Arms

Ten, at two heights

Light source

Ten E14 bulbs (not included)

Minimum ceiling height

10 ft over a table; 11 ft where people walk beneath

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush to reach into the leaves. Wipe the blue body with a soft, dry cloth only. Avoid water, metal polish, abrasives and chemical cleaners, which will damage the antique and painted finishes.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast brass, with crystal drops

Finish

Antique brass

Diameter

32 in / 81.3 cm

Height

32 in / 81.3 cm, without chain

Tiers

Two: 8 lower arms and 4 upper arms

Light source

Twelve E14 bulbs (not included)

Minimum ceiling height

9 ft over a table; 10 ft where people walk beneath

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush to reach into the pierced openwork. Wipe the crystals with a barely damp lint-free cloth and dry them at once. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel in antique gold paint, with crystal and cut glass

Finish

Antique gold

Diameter

48 in / 121.9 cm

Height

36 in / 91.4 cm, without chain

Tiers

Three

Light source

Thirty E14 bulbs (not included)

Minimum ceiling height

10 ft over a table; 11 ft where people walk beneath

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the frame with a soft, dry brush. Wipe the crystals and glass dishes with a barely damp lint-free cloth and dry them at once. Avoid water, polish, abrasives and chemical cleaners on the painted frame, which will damage the antique gold finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, cut glass, crystal

Finish

Antique brass

Diameter

45 in / 114.3 cm

Height

58 in / 147.3 cm

Tiers

2

Light source

21 E14 bulbs (not included)

Minimum ceiling

14 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry cloth. Clean the crystals with a lint-free cloth and a little glass cleaner sprayed onto the cloth. Avoid metal polish and abrasives on the brass.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast brass, frosted glass

Finish

Antique brass

Diameter

25 in / 63.5 cm

Height

42 in / 106.7 cm (without chain)

Arms

8

Light source

Eight E14 bulbs (not included)

Minimum ceiling

10 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush. Wash the glass flames by hand and dry them fully before refitting. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast brass, crystal

Finish

Antique brass

Diameter

48 in / 121.9 cm

Height

36 in / 91.4 cm (without chain)

Tiers

3

Arms

8

Light source

Eight E14 bulbs (not included)

Minimum ceiling

11 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush. Clean the crystals with a lint-free cloth and a little glass cleaner sprayed onto the cloth, never directly onto the chandelier. Avoid metal polish, abrasives and chemical cleaners on the brass.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast brass, cut glass

Finish

Antique brass

Diameter

32 in / 81.3 cm

Height

36 in / 91.4 cm (without chain)

Arms

8

Light source

Eight E14 bulbs (not included)

Minimum ceiling

10 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush to reach into the leaves, roses and grapes. Wipe the cut glass with a barely damp, lint-free cloth and dry it. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Fabric

Finish

Matte Black

Form

Geometric

Lights

10 lights

Size

Large

Scale

Approximately 80–90 cm diameter span across outer arms

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Finish

Antique Gold

Length

53 in

Depth

26 in

Height

48 in

Bulbs

8

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel

Secondary material

Golden Tinted Glass Shade and K9 Crystal

Finish

White + Gold paint

Diameter

47 in

Height

36 in

Bulbs

8

Bulb holder

E27

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Brass

Finish

Matte Black

Form

Geometric

Lights

10 lights

Size

Large

Scale

Approximately 90–100cm diameter ring; works in rooms 14ft+ wide

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Brass

Finish

Matte Black

Form

Cage

Lights

6 lights

Size

Large

Scale

Approximately 70–80cm diameter; bold presence without bulk

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Fabric, Crystal

Finish

Antique

Form

Tiered

Lights

8 lights

Size

Large

Scale

Approximately 75–85cm diameter; substantial presence in medium-to-large rooms

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel (MS), curved glass

Finish

Antique gold paint

Height

120 in / 304.8 cm (10 ft)

Diameter

36 in / 91.4 cm

Light source

Twelve E14 bulbs, two tiers (not included)

Minimum ceiling

20 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the frame with a soft, dry brush. Clean the glass with glass cleaner sprayed onto a lint-free cloth. Avoid abrasive pads and chemical cleaning products on the painted finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Finish

Polished

Form

Tiered

Lights

8 lights

Size

Medium

Scale

Approximately 70–80cm diameter; mid-sized chandelier suitable for rooms 12–16ft wide

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Crystal

Finish

Antique

Form

Drum

Lights

6 lights

Size

Medium

Scale

Approximately 18 inches diameter × 20 inches tall

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Secondary material

Black Fabric Shade

Finish

Matt Black

Diameter

31 in

Height

50 in

Bulbs

8

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Stainless steel

Secondary material

Different shades of fluted glass

Finish

PVD gold

Length

71 in

Depth

30 in

Height

60 in

Bulbs

8

Bulb holder

philips conceal light

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Crystal

Finish

Antique

Form

Cascade

Lights

3 lights

Size

Large

Scale

Approximately 80–90cm wide, low-to-medium drop

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Glass, Brass

Finish

Patina

Form

Linear

Lights

5 lights

Size

Large

Scale

Approximately 120–140cm wide, low-profile drop

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Glass

Finish

Antique

Form

Linear

Lights

6 lights

Size

Large

Scale

Approximately 54–60 inches long × 16 inches wide × 14 inches tall

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Glass

Finish

Antique

Form

Linear

Lights

4 lights

Size

Large

Scale

Approximately 48 inches long × 14 inches wide × 12 inches tall

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel

Secondary material

Crystal + Fabric Shade

Finish

Black paint

Diameter

24 in

Height

39 in

Bulbs

5

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Fabric, Crystal, Glass

Finish

Antique

Form

Tiered

Lights

12 lights

Size

Large

Scale

Approximately 80–90cm diameter; suits rooms 14ft+ wide

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, with crystal drops and fabric shades

Finish

Antique brass

Diameter

42 in / 106.7 cm

Height

40 in / 101.6 cm, without chain

Tiers

Two: 8 lower arms and 4 upper arms

Light source

Twelve E14 bulbs (not included)

Minimum ceiling height

10 ft over a table; 11 ft where people walk beneath

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush to reach into the leaves, and wipe the balls with a soft dry cloth. Wipe the crystals with a barely damp lint-free cloth and dry them at once. Freshen the shades with a soft brush. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Finish

Antique

Form

Dome

Lights

6 lights

Size

Large

Scale

Cluster spans approximately 60–70cm wide, total drop approximately 150cm

Minimum ceiling

12ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel

Secondary material

Crystal

Finish

Silver leafing antique

Diameter

48 in

Height

46 in

Bulbs

12

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Secondary material

Clear and Colored Crsytal

Finish

Saturn

Length

52 in

Depth

29 in

Height

43 in

Bulbs

12

Bulb holder

G9

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Glass

Finish

Antique

Form

Urn

Lights

4 lights

Size

Medium

Dimensions

Height 24 in (61 cm) without chain · Diameter 19 in (48 cm)

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Brass

Finish

Distressed

Form

Shield

Lights

4 lights

Size

Medium

Scale

Approximately 65–70cm tall, 55cm wide

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Secondary material

Fabric Shade

Finish

Antique

Diameter

21 in

Height

27 in

Bulbs

5

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel (MS), fabric

Finish

Glossy black paint

Form

Tiered

Lights

22 lights

Diameter

34 in / 86.4 cm

Height

36 in / 91.4 cm (without chain)

Size

Large

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Wipe the glossy paint with a soft, dry cloth and freshen the fabric shades with a soft brush. Avoid abrasive pads and chemical cleaning products — they will dull the gloss.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast brass, with crystal drops and fabric shades

Finish

Antique brass

Diameter

42 in / 106.7 cm

Height

40 in / 101.6 cm, without chain

Tiers

Two: 8 lower arms and 4 upper arms

Light source

Twelve E14 bulbs (not included)

Minimum ceiling height

10 ft over a table; 11 ft where people walk beneath

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush to reach into the leaves. Wipe the crystals with a barely damp lint-free cloth and dry them at once. Freshen the shades with a soft brush. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, fabric shades

Finish

Antique brass

Diameter

42 in / 106.7 cm

Height

38 in / 96.5 cm

Arms

9 (6 outer, 3 inner)

Light source

Nine bulbs (not included)

Minimum ceiling

10 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush. Freshen the shades with a soft brush. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Crystal, Brass

Finish

Matte Black

Form

Cascade

Lights

6 lights

Size

Large

Scale

Approximately 70cm wide, large chandelier with generous crystal drop

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Fabric, Glass

Finish

Gilt

Form

Tiered

Lights

12 lights

Size

Large

Scale

Approximately 90–100cm diameter; fills large ceiling spans gracefully

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Resin

Finish

Matte Black

Form

Cascade

Lights

6 lights

Size

Grand

Scale

Very tall sculptural piece, approximately 120–150cm height, grand scale

Minimum ceiling

12ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel (MS), fabric

Finish

Dark chocolate brown paint

Shades

Flower-shaped fabric, 8 in / 20.3 cm diameter

Height

47 in / 119.4 cm (ceiling to lowest point)

Length

28.5 in / 72.4 cm

Form

Linear

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Dust the metal with a soft, dry cloth and freshen the fabric shades with a soft brush. Avoid abrasive pads and chemical cleaning products — they will mark the paint.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Wood, Beads

Finish

Distressed

Form

Cascade

Lights

6 lights

Size

Medium

Scale

Approximately 65–70cm wide, standard drop

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel

Secondary material

K9 Crystal

Finish

White + Gold paint

Diameter

25 in

Height

25 in

Bulbs

4

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel

Secondary material

Crystal

Finish

White + Gold paint

Diameter

16 in

Height

24 in

Bulbs

4

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Coloured glass

Secondary material

SS

Diameter

16 in

Height

26 in

Bulbs

7

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Crystal

Finish

Antique

Form

Tiered

Lights

12 lights

Size

Large

Scale

Cluster spans approximately 90–100 cm; individual pendants 35 cm diameter

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Brass

Finish

Matte Black

Form

Shield

Lights

5 lights

Size

Large

Scale

Approximately 80cm wide × 100cm tall; highly vertical, suits double-height ceilings

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Glass, Iron

Finish

Antique

Form

Geometric

Lights

3 lights

Size

Medium

Dimensions

Height 28 in (71 cm) without chain · Diameter 17 in (43 cm)

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Iron, Fabric

Finish

Matte Black

Form

Linear

Size

Grand

Scale

Approximately 120–150cm length; suits dining tables 8–10 seats long

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Stainless steel

Finish

PVD gold

Diameter

20 in

Height

27 in

Bulbs

5

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass and glass

Finish

Antique

Length

45 in

Depth

12 in

Height

18 in

Bulbs

8

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Glass

Finish

Antique

Form

Linear

Lights

6 lights

Size

Large

Length

4 feet / 48 inches (122 cm)

Width

18 inches (45.7 cm)

Height without rod

12 inches (30.5 cm)

Rod / drop

3 feet as shown in the first image; customisable, message us the size after ordering

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Stainless steel

Secondary material

Glass beads, Fabric shade

Finish

PVD Gold

Diameter

47 in

Height

59 in

Bulbs

9

Bulb holder

E27

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast brass, diamond-cut glass

Finish

Antique Gold

Diameter

32 in / 81.3 cm

Height

45 in / 114.3 cm

Lights

6 (5 arm globes + 1 central bowl), bulbs not included

Warranty

2 years

Switch off at the mains and let the bulbs cool before cleaning. Dust the brass with a soft, dry cloth. Wipe the cut glass with a barely damp cloth, then dry it straight away. The aged finish is meant to deepen with time, so do not polish it back, and never use abrasive pads or chemical cleaners.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Secondary material

Fluted Glass Shade

Finish

Antique Gold

Diameter

41 in

Height

26 in

Bulbs

8

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast aluminium

Glass

Curved clear glass

Finish

Antique gold leaf, dull and aged

Height

32 in / 81.3 cm (without chain)

Diameter

15.5 in / 39.4 cm

Light source

Four E14 bulbs (not included)

Warranty

2 years

Switch off at the mains and let the bulbs cool before cleaning. Gold leaf is delicate: dust it lightly with a soft, dry brush and never rub, wet or polish it. Clean the glass with glass cleaner sprayed onto a cloth, never directly onto the lantern. Avoid abrasives and chemical cleaners.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, with crystal drops, cut-glass dishes and linen shades

Finish

Antique brass

Diameter

48 in / 121.9 cm

Height

40 in / 101.6 cm, without chain

Tiers

Two

Light source

Thirty E14 bulbs (not included)

Minimum ceiling height

11 ft over a table; 12 ft or double height where people walk beneath

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush to reach into the leaves. Wipe the crystals and glass dishes with a barely damp lint-free cloth and dry them at once. Freshen the linen shades with a soft brush. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Ms and brass

Secondary material

Clear Glass

Finish

Matt black paint + saturn for brass pieces

Diameter

15 in

Height

28 in

Bulbs

4

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel (MS), crystal drops

Finish

Black paint with hints of gold

Shades

21 ivory fabric shades with gold embroidery

Diameter

60 in / 152.4 cm

Height

84 in / 213.4 cm (without chain, to canopy)

Tiers

3

Lights

21 (bulbs not included)

Minimum ceiling

18 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the frame with a soft, dry cloth or brush. Freshen the fabric shades with a soft brush. Wipe the crystals with a barely damp, lint-free cloth and dry them. Avoid abrasive pads and chemical cleaning products.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Mild steel

Finish

Black Paint

Diameter

38 in

Height

48 in

Bulbs

21

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Dry the surface after cleaning to prevent marks. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, with clear mouth-blown glass

Finish

Antique brass

Set

Five lantern pendants on a pierced brass jaali ceiling canopy

Each lantern

12 in / 30.5 cm diameter, 32 in / 81.3 cm tall without chain

Light source

Twenty E14 bulbs, four per lantern (not included)

Drop

Chain lengths are set to your ceiling height at the time of order

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Wipe the glass inside and out with a soft, barely damp cloth and dry it at once. Dust the brass with a soft, dry brush to reach into the jaali. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Secondary material

Cloth Shade

Finish

Antique

Diameter

28 in

Height

26 in

Bulbs

6

Bulb holder

E14

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Secondary material

Glass Shade

Finish

Antique

Diameter

36 in

Height

29 in

Bulbs

6

Bulb holder

E27

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass

Finish

Brushed

Form

Dome

Lights

1 light

Size

Large

Scale

Approximately 30–36 inches diameter

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast aluminium, curved glass

Finish

Antique gold paint

Height

60 in / 152.4 cm

Diameter

32 in / 81.3 cm

Light source

Nine E14 bulbs (not included)

Minimum ceiling

12 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the frame with a soft, dry brush. Clean the glass with glass cleaner sprayed onto a lint-free cloth. Avoid abrasive pads and chemical cleaning products on the painted finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Cast brass, pleated fabric lining

Finish

Antique brass

Diameter

30 in / 76.2 cm

Height

40 in / 101.6 cm

Light source

Eight E14 bulbs (not included)

Minimum ceiling

10 ft

Warranty

2 years

Switch off and let the bulbs cool before cleaning. Dust the brass with a soft, dry brush. Freshen the fabric lining with a soft brush. Avoid metal polish, abrasives and chemical cleaners, which will strip the antique finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, hand-cut glass

Finish

Polished brass

Height

44 in / 111.8 cm

Diameter

17 in / 43.2 cm

Light source

Bulbs not included

Warranty

2 years

Switch off at the mains and let the bulbs cool before cleaning. Clean the glass with glass cleaner sprayed onto a soft cloth, never directly onto the lantern, then dry it. Dust the brass with a soft, dry cloth. Avoid abrasives and chemical cleaners on the brass.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Glass

Finish

Polished

Form

Linear

Lights

12 lights

Size

Large

Scale

Large oval canopy approximately 100cm wide, drops cascade 80–120cm below

Minimum ceiling

12ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. An occasional gentle buff with a dry cloth maintains the metal’s lustre. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Glass

Finish

Antique

Form

Cascade

Lights

1 light

Size

Medium

Scale

Approximately 50–60cm diameter, medium room scale

Minimum ceiling

9ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.

Material

Brass, Glass

Finish

Antique

Form

Globe

Lights

5 lights

Size

Large

Scale

Canopy approximately 60cm wide, globes approximately 25–30cm diameter each

Minimum ceiling

10ft

Switch off the power and allow the fitting to cool before cleaning. Remove dust gently using a soft, dry cloth. Wipe glass and crystal with a lightly dampened cloth and dry straight away. Allow the aged patina to develop naturally; do not polish it away. Avoid abrasive pads and chemical cleaning products — they will strip the finish.

Size, shape, material, finish, drop length and shade options can be discussed before ordering, along with electrical components suited to the destination. Custom details are subject to design suitability and must be agreed before production. Contact us to discuss your requirements.

Made to order. Production takes 4–6 weeks.